Alloy Plate

Monel 400 Plate

Monel 400 Plate DescriptionMonel 400is a corrosion-resistant alloy with the largest dosage, the most wide range of uses, and excellent comprehensive properties. This alloy has excellent corrosion resistance in hydrofluoric acid and fluorine gas media, and also has excel

Factory area 20000 square meters.
Support specification customization.
Strict quality control, ISO certification.
Abide by the contract and deliver on time.
After-sales team gives you the best service.

+86 13293766666

admin@sdyulun.com

Product Details
Comments

Monel 400 Plate Description

Monel 400 is a corrosion-resistant alloy with the largest dosage, the most wide range of uses, and excellent comprehensive properties. This alloy has excellent corrosion resistance in hydrofluoric acid and fluorine gas media, and also has excellent corrosion resistance against hot concentrated alkali liquid. It is also resistant to corrosion from neutral solutions, water, seawater, atmosphere, organic compounds, etc. An important feature of this alloy is that it generally does not produce stress corrosion cracking and has good cutting performance. Monel 400 plate is widely used in many corrosive applications, particularly in the marine and chemical industries. Monel 400 can be easily machined through conventional machining operations. It is a relatively soft material suitable for thermoforming into almost any shape.

Product Parameters

Product Name	Monel 400 Plate
Thickness	0.3mm-200mm
Length	2000mm, 2438mm, 3000mm, 5800mm, 6000mm, 12000mm, etc.
Width	40mm-600mm, 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc.
Standard	ASTM, AISI, JIS, GB, DIN, EN, etc.
Surface	BA, 2B, NO.1, NO.4, 4K, HL, 8K, etc.
Certificate	ISO, SGS, BV
Production Technology	Hot Rolling, Cold Rolling

Chemical Composition

Nickel, min^A	Copper	lron, max	Manganese, max	Carbon, max	Silicon, max	Sulfur, max
63.0%	28.0% - 34.0%	2.5%	2.0%	0.3%	0.5%	0.024%

Mechanical Properties

Condition (Temper)	Tensile Strength, min, psi (MPa)	Yield Strength^A (0.2 % offset), min, psi (MPa)	Elongation in 2 in. or 50 mm, or 4D, min,%	Rockwell Hardness (B Scale)^b,c
Hot-Rolled Plate
Annealed	70000 (485)	28000 (195)	35	-
As-Rolled^D,E	75000 (515)	40000 (275)	25	-
Hot-Rolled Sheet
Annealed	70000 (485)	28000 (195)	35	-
Cold-Rolled Sheet
Annealed	70000 - 85000 (485 - 585)	28000 (195)	35	-
Quarter-Hard	-	-	-	73 - 83
Half-Hard	-	-	-	82 - 90
Hard	100000 (690)	90000 (620)	2	-
Cold-Rolled Strip
Annealed	70000 - 85000 (485 - 585)^F	28000 (195)	35^F	-
Skin Hard	-	-	-	68 - 73
Quarter-Hard	-	-	-	73 - 83
Half-Hard	-	-	-	82 - 90
Three-Quarter-Hard	-	-	-	89 - 94
Hard	100000 (690)^F	90000 (620)^F	2^F	-
Spring Temper	-	-	-	98 min

Physical Performance

Physical Performance	Units	Temperature in°C
Density	8.14 g/cm³	Room
Specific Heat	0.105 Kcal/kg.C	Room
Melting Range	1370-1400°C	-
Modulus of Elasticity	196 KN/mm²	20°
Electrical Resistivity	113 µΩ.cm	25°
Coefficient of Expansion	14.1 µm/m °C	25 - 100°
Thermal Conductivity	11.1 w/m-° K	25°

Scope of Application

Used in marine engineering, chemical and hydrocarbon processing equipment, gasoline tanks and fresh water tanks, crude oil distillers, degassing heaters, boiler feed water heaters and other heat exchangers, valves, pumps, shafts, accessories and fasteners, Industrial heat exchangers, chlorinated solvents, crude oil distillation columns, etc.

Mark Doe	Greatest product ever Galvanized coils are our top choice for durability and consistency. The zinc layer uniformity saves us time in post-processing, and your team’s technical support is always helpful.
Mahan Selon	Greatest product ever We have been purchasing yulun galvanized steel coils for the quality has consistently exceeded our expectations. The coating uniformity, corrosion resistance, and surface finish meet our strict standards, making them ideal for construction.